How to Use Air Conditioning Efficiently
How you use air conditioning makes a real difference to what it costs to run. Most of the savings come from a few simple habits: keeping heat out (or in), setting sensible temperatures, letting the system run steadily, and keeping it clean.
In summer
Keep the heat out first
The less heat that gets into a room, the less work the air conditioning has to do. Kevin Pennington, our managing director, told Ideal Home that the first step is to stop heat getting in, with white curtains or reflective window film. He also suggested to the Lancashire Evening Post shading south-facing windows from the outside. Outside shading stops the sun's heat before it reaches the glass.
Our guide to cooling down a room has more ideas.
Close the doors and windows
An open window or door lets warm air straight back in. Keep them closed while the system is running, and air the room early in the morning or late in the evening instead, when it's cooler outside.
Set the temperature you want, not the lowest setting
A lower setting won't cool the room any faster. When the room is a long way from the set temperature, the system already works at full output. Setting it too low just means it carries on cooling past the temperature you wanted.
Start before the room gets hot
Use the timer to start cooling before the hottest part of the day. That lets the system hold a comfortable temperature at a moderate output, rather than working flat out to cool a room that has already heated up.
Use the right mode
On mild, muggy days, dry mode or fan mode may be all you need. See air conditioning remote symbols for what each mode does, and does air conditioning reduce humidity? for when to use dry mode.
Point the louvres up or straight ahead
Cool air sinks, so when you're cooling, setting the louvres level or slightly upwards helps it spread across the room.
In winter
Keep a steady temperature
The Energy Saving Trust advises that heat pumps work most efficiently when they keep a steady temperature, rather than being switched off and then having to work hard to warm the room up again. In a room you use every day, a steady, moderate setting is usually the most efficient way to run air conditioning for heating.
Set the lowest temperature you're comfortable at
The Energy Saving Trust advises setting your thermostat to the lowest setting that keeps the room comfortable.
Point the louvres down
Warm air rises. Angling the louvres downwards when heating gets the warmth to where you're sitting, rather than leaving it at the ceiling.
Keep the outdoor unit clear
Snow, leaves or anything stacked around the outdoor unit restricts the airflow it needs. Don't cover it while it's in use. See does air conditioning work in winter?
Heat the rooms you use
Air conditioning heats the room it's in, which can be an advantage. Kevin told Homebuilding & Renovating that he heats the rooms he uses most with air conditioning rather than running central heating for the whole house. Whether that suits you depends on your home and routine: see air conditioning vs gas central heating.
All year round
Clean the filters about every two weeks when you're using the system regularly. Clogged filters make it work harder. See how to clean your air conditioner.
Have it serviced once a year, or twice a year if you use it for heating. See our maintenance checklist.
Use timers and schedules for rooms you only use at certain times. A smart control lets you switch it on or off from your phone.
Don't heat or cool empty rooms for hours on end.
Keep the indoor unit clear. Curtains, shelves or furniture in front of it block the airflow.
Keep internal doors closed so the system only has to heat or cool the room it's in.
Why your air conditioning might be using more electricity than expected
Dirty filters: clean them, then keep to a regular routine.
Outdoor unit blocked by leaves, snow or plants: clear the area around it.
Doors or windows left open: keep them closed while it runs.
Very low settings in summer or very high in winter: set the temperature you actually want.
Running in rooms that aren't being used: use the timer or switch it off.
Very cold weather: efficiency falls and the system defrosts from time to time. This is normal.
The system is the wrong size for the room: ask for a survey: see what size air conditioner you need.
A fault, such as a refrigerant leak: call an engineer: see air conditioner not working.
An old, less efficient system: see replacing old air conditioning.
Our guide to how much electricity air conditioning uses explains what's normal.
Frequently asked questions
Is it cheaper to leave air conditioning on all day?
For heating a room you use every day, running it steadily can cost no more than switching it on and off, because it doesn't have to work as hard to recover. For rooms that are empty for hours, switch it off or use the timer.
Does eco mode save money?
It depends on the system. What eco mode does varies between manufacturers and models, so check your manual to see exactly what it changes.
What temperature should I set my air conditioning to?
The temperature you want the room to be. For heating, the Energy Saving Trust suggests the lowest setting you're comfortable at. For cooling, there's no benefit in setting it lower than you need.
If you'd like help getting the best from your system, call us on 01772 288651 or use the quote form at the bottom of this page.
Last updated: November 2026.
Sources
Energy Saving Trust, How to ensure a heat pump runs efficiently
Energy Saving Trust, The most economical ways to use your central heating
Ideal Home, Experts reveal the best places to put air conditioning in a house (29 June 2026)
Lancashire Evening Post, Preston air conditioning experts reveal 8 ways to beat the heat
Homebuilding & Renovating, Is air conditioning worth it in the UK? (26 May 2026)
Request a Free Quote
Leave your details and our team will be in touch.

