How Much Electricity Does Air Conditioning Use?
The short answer: a typical single-room wall-mounted system uses about 0.5 to 0.9 kW of electricity at full output. At the current price cap rate of 26.32p per kWh, that's roughly 13p to 24p an hour. Once the room reaches the temperature you've set, it slows down and uses much less, often under 10p an hour.
How much that adds up to over a year depends on the size and efficiency of the system and how much you use it. This guide explains how to read the figures manufacturers publish, so you can work it out for any system.
Capacity is not consumption
When an air conditioner is described as "2.5 kW" or "3.5 kW", that's its capacity: how much heat it can remove from the room (or add to it, when heating). It isn't the electricity it uses.
Because air conditioning moves heat rather than making it, it uses much less electricity than its capacity. The ratio between the two at standard test conditions has a name:
EER (energy efficiency ratio): cooling capacity divided by electrical input
COP (coefficient of performance): heating capacity divided by electrical input. Heating capacity is rated at an outdoor temperature of 7°C.
Our guide to what size air conditioner you need explains capacity, including how kW converts to BTU.
A worked example from a data sheet
Mitsubishi Electric's data sheet for its MSZ-LN25 wall-mounted system lists:
Cooling: 2.5 kW of cooling from 0.485 kW of electricity (EER 5.15), costing about 12.8p an hour at 26.32p per kWh
Heating: 3.2 kW of heat from 0.600 kW of electricity (COP 5.33), costing about 15.8p an hour at 26.32p per kWh
That's a high-efficiency model. A system with an EER of 3.5 would need 1 kW of electricity to deliver 3.5 kW of cooling, which costs about 26p an hour at full output.
These figures are for the system running at its rated output. Most of the time it runs at less than that.
Why it uses less once the room is comfortable
An inverter system speeds its compressor up and down to match what the room needs, instead of switching fully on and off. After the first burst of cooling or heating, it settles at a much lower output to hold the temperature, and uses much less electricity. Our guide to inverter air conditioning explains how this works.
That's why seasonal figures (SEER and SCOP) are a better guide to running costs than EER and COP. They average performance across a season of different temperatures and part loads. See SEER and SCOP explained.
The annual figures on the energy label
The energy label on an air conditioner shows its annual energy consumption in kWh for cooling, and for heating in an "average" European climate. Under the labelling regulation, these figures are worked out from the system's design load and its seasonal efficiency:
Cooling: design load × 350 hours ÷ SEER
Heating: design load × 1,400 hours ÷ SCOP
The 350 and 1,400 hours are standard assumptions, so every model is compared on the same basis. They're not a prediction of how much you'll use your system: your real use may be much more or much less.
Here's what the formula gives for some typical systems, at 26.32p per kWh:
2.5 kW, cooling, SEER 8.5 (A+++): 103 kWh a year on the energy label, costing £27.09
3.5 kW, cooling, SEER 8.5 (A+++): 144 kWh a year on the energy label, costing £37.93
3.5 kW, cooling, SEER 6.1 (A++): 201 kWh a year on the energy label, costing £52.86
2.5 kW heating design load, SCOP 5.1 (A+++): 686 kWh a year on the energy label, costing £180.63
2.5 kW heating design load, SCOP 4.0 (A+): 875 kWh a year on the energy label, costing £230.30
The heating design load on the label isn't the same as the rated heating capacity on the data sheet, so check the label or product information sheet for the model you're considering.
Working out your own costs
You can estimate the electricity a system uses with a simple sum:
Electricity used (kWh) = average output (kW) × hours of use ÷ seasonal efficiency
Then multiply by your electricity price.
Summer cooling example
A 3.5 kW system, averaging half its rated output, with a SEER of 6.1:
Electricity per hour: 3.5 × 0.5 ÷ 6.1 = about 0.29 kWh, or about 7.6p
Six hours a day: about 45p a day
Sixty days of summer: about 103 kWh, or about £27
Winter heating example
The same 3.5 kW size, averaging half its output, with a SCOP of 4.0:
Electricity per hour: 3.5 × 0.5 ÷ 4.0 = about 0.44 kWh, or about 11.5p
Eight hours a day: about 92p a day
150 days of the heating season: about 525 kWh, or about £138
These are illustrations, not predictions. How hard the system works depends on the room, the weather and the temperature you set.
Why a system might use more than expected
It's the wrong size for the room. An oversized system switches on and off more, and an undersized one runs flat out.
Doors or windows are left open while it runs.
The temperature is set very low in summer or very high in winter.
The filters are clogged or the outdoor unit is blocked.
It's heating in very cold weather, when efficiency drops and the system has to defrost from time to time.
It has a fault, such as a refrigerant leak, which needs an engineer.
Our guide to using air conditioning efficiently covers each of these.
Frequently asked questions
How many kWh does air conditioning use per hour?
At full output, divide the capacity by the EER (for cooling) or COP (for heating). A 2.5 kW system with an EER of 5 uses about 0.5 kWh an hour. Once the room is comfortable, it uses much less.
Does air conditioning use more electricity heating or cooling?
Over a year in the UK, usually heating, because a home needs heat for far more of the year than it needs cooling. The energy label reflects this, assuming 1,400 hours of heating against 350 hours of cooling.
Where can I find how much electricity my system uses?
The energy label and the product information sheet show annual consumption, and the manufacturer's data sheet shows the rated electrical input. Some systems also report their own energy use through an app.
How much does air conditioning cost to run overall?
See our guide to air conditioning costs, which covers installation and running costs.
If you'd like help estimating what a system would cost to run in your home, call us on 01772 288651 or use the quote form at the bottom of this page.
Last updated: November 2026.
Sources
Ofgem, Changes to energy price cap between 1 October and 31 December 2026
Mitsubishi Electric, MSZ-LN R32 wall mounted system data sheet (February 2026)
Commission Delegated Regulation (EU) No 626/2011 (energy labelling of air conditioners)
Request a Free Quote
Leave your details and our team will be in touch.

