Air Conditioning Maintenance Checklist: What You Can Do and What Needs an Engineer
Looking after air conditioning is mostly simple. Clean the filters, keep the outdoor unit clear, and notice when something changes. Anything involving the refrigerant, the electrics or the inside of the units is a job for a qualified engineer.
This guide sets out which tasks are which, with a checklist you can follow through the year.
What you can do yourself
Clean the filters. How often: About every two weeks when you're using the system regularly, more often in dusty rooms. What to do: Switch off, lift the front panel, slide the filters out, vacuum or wash them as your manual says, and let them dry out of direct sun before refitting.
Wipe the indoor unit. How often: Every month or so. What to do: Switch off first and use a damp cloth, then dry it.
Keep the outdoor unit clear. How often: Every month, and after storms or snow. What to do: Brush leaves and debris away gently, keep plants trimmed back, and never use a pressure washer.
Check the drain. How often: At the start of each season. What to do: If the drain runs outside, water should drip from the outlet on a warm day when the system is cooling.
Check the controls. How often: When the clocks change, and after a power cut. What to do: Check the time, timers and settings, and replace the remote's batteries if needed.
Test it before you need it. How often: Spring and autumn. What to do: Run cooling before summer and heating before winter, so any problem shows up early.
Our guide to cleaning your air conditioner shows how to clean the filters and indoor unit step by step.
What needs an engineer
Some tasks must be left to a qualified engineer, either because the law says so or because they're unsafe to attempt yourself.
Anything involving the refrigerant
Only engineers with the right F-gas qualification can work on the refrigerant circuit. That includes checking pressures, finding and repairing leaks, and adding or removing refrigerant. A properly installed system is sealed, so if it's short of refrigerant, there's a leak that needs fixing.
Don't be tempted by DIY "re-gas" kits. As well as being against the rules, refrigerants such as R32 are classed as mildly flammable. Our guides to R32 refrigerant and the dangers of DIY air conditioning explain more.
Legal leak checks
By law, equipment containing fluorinated gases equal to 5 tonnes of CO2 or more must be checked for leaks at least once a year. For R32, that threshold is about 7.4 kg of refrigerant.
A single-room system usually holds far less. For example, Mitsubishi Electric's data sheet for its 2.5 kW MSZ-LN system lists a charge of 0.8 kg of R32, equal to 0.54 tonnes of CO2. Systems that size fall well below the legal threshold, but larger systems can exceed it. The refrigerant charge is shown on the outdoor unit's rating label.
Everything inside the units
Deep cleaning the indoor coil, fan and drain tray
Checking and cleaning the condensate drain and any drain pump
Electrical safety checks and tightening connections
Checking the system is heating and cooling as it should
Removing covers beyond the filter access panel, or moving any part of the system
How often to have it serviced
We recommend a service once a year, or twice a year if you use your system for heating as well as cooling. Check your warranty terms too: some manufacturers' warranties require regular servicing. See air conditioning servicing and the benefits of regular maintenance.
A checklist for the year
Every two weeks of regular use: clean the filters.
Every month: check the outdoor unit is clear, wipe the indoor unit, and listen for any change in sound.
Spring: clean the filters, clear any winter debris from the outdoor unit, test cooling, check the drain, and book a service if one is due.
Autumn: clean the filters, clear leaves from the outdoor unit, test heating, and book a service if one is due.
Every year: professional service, or twice a year if you use the system for heating.
After a storm or power cut: check the outdoor unit for damage and reset the time and timers.
Warning signs to call an engineer about
Water dripping from the indoor unit: see air conditioner leaking water
Ice on the indoor unit or the pipes when it's cooling
Weak airflow, or the system not heating or cooling properly even with clean filters: see air conditioner not working
Grinding, rattling or other new noises
A burning smell: switch the system off and call an engineer
A musty smell that cleaning the filters doesn't cure
An error code on the display
Electricity bills noticeably higher than usual for the same use
Our guide to the signs your system needs a repair covers these in more detail.
Frequently asked questions
Can I service my air conditioning myself?
You can do the routine tasks listed earlier in this guide, and they make a real difference. A full service includes refrigerant and electrical checks, which need a qualified engineer.
Is servicing a legal requirement?
Legal leak checks apply only to systems holding refrigerant equal to 5 tonnes of CO2 or more, which a single-room system is usually well below. Regular servicing is still the best way to keep any system efficient and reliable, and some warranties require it.
What happens if I never clean the filters?
Clogged filters restrict the airflow, so the system works harder, costs more to run and heats or cools less well. Dirty filters can also cause musty smells.
If you'd like to book a service or have your system checked, call us on 01772 288651 or use the quote form at the bottom of this page.
Last updated: November 2026.
Sources
GOV.UK, Qualifications required to work on equipment containing F gas
Daikin Applied UK, F-gas regulation guide (R32 quantities at each threshold)
Mitsubishi Electric, MSZ-LN R32 wall mounted system data sheet (February 2026)
Request a Free Quote
Leave your details and our team will be in touch.

