Where Can Air Conditioning Be Installed?
The short answer: in most rooms of most homes, including upstairs rooms and rooms without an outside wall. A split system has an indoor unit in the room and an outdoor unit outside, joined by refrigerant pipes, a cable and a drain. What limits the options is mainly how far apart the two units can be, how the drain can run, and the planning rules for the outdoor unit.
Start with the right room
Air conditioning works best in the rooms where you spend your time. Kevin Pennington, our managing director, advised in an Ideal Home feature that units belong in the rooms where people sleep or sit, rather than in hallways and landings, where much of the cooled air is wasted. Our article on air conditioning in hallways explains why.
Where the indoor unit goes
The most familiar type is the wall-mounted indoor unit, fitted high on a wall. A good position:
lets the air spread across the room, rather than blowing straight at the bed, the sofa or a desk
leaves space around the unit for the airflow and for removing the filters. Each manufacturer sets minimum clearances from the ceiling and side walls.
has a practical route for the pipes and drain to the outside
is out of the way of furniture, curtains and shelves that would block the airflow
Above a window or a door is often a good spot, as long as there's enough height for the unit and its clearances.
If a wall-mounted unit won't work, there are other styles: floor-standing units sit low on the wall and suit rooms with sloping ceilings or no space high on the wall, ceiling cassettes fit into the ceiling, and ducted systems hide almost everything out of sight.
Can air conditioning be installed upstairs?
Yes. Bedrooms and loft rooms are often the rooms that most need cooling in summer.
The outdoor unit can sit on the ground, with the pipes running up the outside wall in trunking, or on a wall bracket. Routing the pipes through the loft is another common option for upstairs rooms. Our guide to air conditioning trunking explains the different routes.
There are limits on how far apart the two units can be. Every system has a maximum pipe length and a maximum height difference between the indoor and outdoor units. For example, Mitsubishi Electric's data sheet for its 2.5 kW and 3.5 kW MSZ-LN systems lists a maximum of 20 metres of pipe and 12 metres of height difference. Other models differ, so the survey checks the figures for the system you're having.
See also bedroom air conditioning and loft conversion air conditioning.
Can it go on an internal wall?
Yes, as long as there's a route for the pipes and drain to reach the outside. That might be through a ceiling or floor void, through the loft, or in neat trunking along the walls. The run will be longer than it would be from an outside wall, so it has to stay within the manufacturer's limits.
The drain needs a steady fall to an outlet. Where it can't fall all the way, a small condensate pump lifts the water, and it can usually be hidden in the trunking or behind the indoor unit.
The simplest installation of all is an indoor unit on an outside wall with the outdoor unit directly behind it, so the pipes go straight through the wall.
Where the outdoor unit can go
The outdoor unit needs free airflow around it, a solid base or wall bracket, and space for an engineer to work on it. Think about noise too: near bedroom windows, yours or your neighbours', the quietest position matters. Our guide to air conditioning outdoor units covers positioning in detail.
In England, an outdoor unit can often be installed under permitted development, without a planning application, as long as the conditions are met, including a noise limit at the nearest neighbour. Flats, listed buildings and conservation areas have stricter rules. See planning permission for air conditioning, air conditioning for flats and air conditioning in listed buildings.
If an outdoor unit isn't possible at all, see air conditioning without an outdoor unit.
What limits where air conditioning can go
Pipe length and height difference: every model has a maximum. Longer runs can also need extra refrigerant.
The drain: it must fall to a suitable outlet, or have a pump.
The electrical supply: most systems need a dedicated circuit. In England, a new circuit is notifiable under Part P of the Building Regulations.
The wall: it must be able to take the fixings for the unit and its bracket.
Planning and building rules: permitted development has limits, and flats, listed buildings and conservation areas have stricter rules.
Access for maintenance: filters need cleaning regularly, and engineers need to reach both units.
Noise: the outdoor unit's position affects you and your neighbours.
Our guide to common installation mistakes explains what goes wrong when these are overlooked.
Frequently asked questions
How far can the outdoor unit be from the indoor unit?
It depends on the model. Many wall-mounted systems allow up to about 20 metres of pipe, but some allow more or less, and there's a separate limit on the height difference.
Can air conditioning be installed in a room with no outside wall?
Yes, if the pipes and drain can be routed to the outside, for example through a ceiling void or the loft.
Can the indoor unit go above my bed?
It can, but position it so the air flows across the room rather than straight down onto you. A unit on the wall facing the bed, or to one side, is usually more comfortable.
Who decides where the units go?
You do, with advice from the surveyor. We agree the positions of both units, the pipe route and the drain with you at the survey, before any work starts.
If you'd like advice on where air conditioning could go in your home, call us on 01772 288651 or use the quote form at the bottom of this page.
Last updated: November 2026.
Sources
Ideal Home, Experts reveal the best places to put air conditioning in a house (29 June 2026)
Mitsubishi Electric, MSZ-LN R32 wall mounted system data sheet (February 2026)
Planning Portal, Air source heat pumps: planning permission
Request a Free Quote
Leave your details and our team will be in touch.

