How to Compare Air Conditioning Installation Quotes
It is sensible to get more than one quote for air conditioning. It can also be confusing. Two quotes for the same room can differ by a surprising amount, and it isn't always obvious why.
The cheapest quote isn't automatically poor value, and the most expensive isn't automatically the best. The key is to make sure you are comparing like with like. This guide explains what to look for, section by section, with a checklist at the end.
Start with the survey
A reliable quote starts with a proper look at your home. The installer should see each room, ask how you use it, check where the outdoor unit can go, work out the pipe route and look at your electrics. A quote given over the phone, or from a couple of photos, is an estimate. The price may change on the day, or the system may not suit the room.
1. The equipment
Every quote should name the exact equipment, not just the brand.
Manufacturer and full model numbers for the indoor and outdoor units. Why it matters: Brands sell several ranges at very different price points. "A Mitsubishi" or "an LG" could mean an entry-level or a premium model.
Cooling and heating capacity of each unit, in kW. Why it matters: Shows whether each room has been sized properly, and lets you compare like with like.
SEER and SCOP ratings. Why it matters: Show cooling and heating efficiency, which affects running costs. See SEER and SCOP explained.
Noise levels in dB(A). Why it matters: Important for bedrooms and for neighbours. See the quietest air conditioners.
Wi-Fi control, if you want it. Why it matters: On some models it is built in, on others it is an extra.
If two quotes name different models, look them up. You will often find that one is a premium range with lower noise and higher efficiency, which explains some of the price difference.
2. The installation materials
Length of pipework included. Why it matters: Some quotes include a fixed length and charge extra per metre beyond it.
Pipe route, inside and outside. Why it matters: Affects appearance and price.
Trunking type and colour. Why it matters: Cheaper trunking may look less tidy and discolour over time.
Wall brackets or ground stand for the outdoor unit. Why it matters: Anti-vibration mounts help reduce noise transmitted into the building.
Condensate drainage. Why it matters: Is it a gravity drain, or does the job need a pump? Where does the water go?
3. Electrical work
Most systems need a dedicated circuit from your consumer unit, plus an isolator near the outdoor unit. Check that this is included in the price rather than listed as "by others". In England, installing a new circuit is notifiable under Part P of the Building Regulations, so ask who will carry it out and whether you will receive an electrical installation certificate.
If your consumer unit is old or full, it may need upgrading. A good installer will spot that at the survey rather than on installation day.
4. Labour and who does the work
Who will install the system? Some companies use their own engineers. Others subcontract the work. Both can be fine, but you should know who will be in your home.
How long will it take? Most single-room systems can be fitted in a day. Multi-room systems take longer.
What making good is included? For example, filling around holes, tidying the pipe route and removing packaging.
Is the company F-gas certified? In the UK, companies that install air conditioning must hold an F-gas company certificate, and engineers who handle refrigerant must hold the right qualification. Ask for the certificate number.
5. Testing and commissioning
A properly installed system should be pressure tested for leaks and evacuated with a vacuum pump before the refrigerant is released, following the manufacturer's instructions. You should then be shown how to use the controls and clean the filters. Ask each installer how they test and commission a system. A clear, confident answer is a good sign.
6. Warranties
Warranties are one of the most important things to compare, and one of the easiest to misunderstand.
Manufacturer's warranty. Ask how long it is, whether it covers parts only or parts and labour, and what conditions apply. Many manufacturers require the system to be registered and serviced regularly by a qualified engineer to keep the warranty valid.
Installer's workmanship guarantee. This covers problems caused by the installation itself, such as leaks at pipe joints or drainage faults. Ask how long it lasts and what it covers.
Who you call if something goes wrong. In practice, warranty claims usually go through the installer, so their aftercare matters as much as the length of the warranty.
Ask for warranty terms in writing, and check whether any extended warranty depends on registration or servicing.
7. Ongoing support and servicing
Air conditioning should be serviced at least once a year, or twice a year if you use it heavily for heating. Ask whether the installer offers servicing, roughly what it costs, and how quickly they respond to breakdowns. A low installation price is less attractive if no one will come back to look after the system.
8. Payment terms and your rights
Deposit. Check how much is required and when. Be cautious about paying most of the price upfront.
Payment stages. Know what is due on completion and how you can pay.
Cancellation rights. If you agree a contract in your own home rather than at the company's premises, you normally have a 14-day cancellation period. The rules are detailed, so check the terms in your quote.
Trader schemes. Some businesses are members of trader schemes, such as Lancashire County Council's Safe Trader Scheme. Ask what membership involves. Lancashire Air Conditioning is a member of the Safe Trader Scheme.
9. Planning and permissions
Ask whether the installation will fall within permitted development, or whether planning permission, listed building consent or freeholder consent will be needed. Who will check this, and who will apply if needed? Our guide to planning permission for air conditioning explains the rules.
Warning signs
No survey, or a price given without seeing the rooms
No model numbers, or vague descriptions such as "inverter wall unit"
Electrical work excluded or vague
No mention of testing, commissioning or certification
Pressure to sign on the day for a discount
A large deposit requested well before installation
Unclear warranty terms
A comparison checklist
Check each quote against this list:
Survey carried out in person
Indoor unit model numbers
Outdoor unit model numbers
Cooling / heating capacity per room (kW)
SEER / SCOP
Indoor noise level dB(A)
Pipe length included, cost per extra metre
Trunking included
Condensate drainage method
Electrical work and certificate included
Installed by own engineers or subcontractors
F-gas company certificate
Testing and commissioning described
Manufacturer warranty, length and conditions
Installer workmanship guarantee
Servicing offered
Deposit and payment terms
Total price
Why quotes vary
The main reasons two quotes differ are:
Different equipment. Entry-level and premium ranges can differ significantly in price, efficiency and noise.
Different sizing. One installer may have specified a larger or smaller unit.
Different scope. One quote may include electrical work, trunking or a longer pipe run that another leaves out.
Different installation standards. Time spent on testing, neat pipe routes and making good adds cost.
Different aftercare. Servicing, response times and warranties have a value.
We are not the cheapest installer and don't try to be. Our quotes list everything that is included, so you can compare them properly. Our installation cost guide explains typical prices, and our guide to common installation mistakes explains what good installation looks like. To arrange a survey, call 01772 288651 or use the quote form at the bottom of this page.
Frequently asked questions
How many air conditioning quotes should I get?
Two or three is usually enough to understand the options and the price range, provided each installer surveys your home.
Why is one quote so much cheaper than the others?
Usually because of different equipment, a narrower scope or a different standard of installation. Compare model numbers, what is included and what is left out before deciding.
Should the quote include the electrical work?
Ideally, yes. If it doesn't, you need to arrange and pay for a separate electrician, and make sure the work is certified.
Last updated: November 2026.
Sources
Request a Free Quote
Leave your details and our team will be in touch.

